The fast, affordable refresh — buffing and re-coating restores shine and protection without sanding to bare wood.
We proudly offer Buff & Re-Coat across the greater Charlotte area, including Buff & Re-Coat in Concord, Buff & Re-Coat in Belmont, Buff & Re-Coat in Cornelius, Buff & Re-Coat in Fort Mill, Buff & Re-Coat in Gastonia, Buff & Re-Coat in Huntersville, Buff & Re-Coat in Indian Trail, Buff & Re-Coat in Kannapolis, Buff & Re-Coat in Matthews, Buff & Re-Coat in Mint Hill, Buff & Re-Coat in Pineville, Buff & Re-Coat in Waxhaw, Buff & Re-Coat in Weddington, Buff & Re-Coat in Ballantyne.
Call, Text or WhatsApp
Refinishing & Installation Projects Completed
Hardwood floors dull from daily life — dust, spills, chair legs and sunlight wear down the finish long before the wood does. When the finish is tired but the wood is sound, buffing and re-coating is the smart middle ground.
We deep-clean, inspect every area, then buff the existing finish and apply a fresh protective coat. No sanding to bare wood, minimal dust, and most homes are done in a day.
A hardwood floor buff and re-coat in Charlotte, NC every 3–5 years keeps floors protected and postpones full refinishing for years. If we find deep damage, we’ll tell you honestly when a full refinish is the better call.
From a quick buff & re-coat to full refinishing, our Charlotte NC hardwood team matches the service to your floor’s actual condition — never more than you need.

Traditional solid and engineered hardwood installation over wood subfloor.

Perfect solution for concrete surfaces and engineered flooring.


Treads and risers built with the same precision as the floor, matched in structure and style.

Stain colors mixed and tested on your wood until the tone suits your walls, trim and furniture.

Site-finished floors sanded with a 95% dustless system and sealed with protective finishes.
Customer contacts us and shares project details.
We check finish condition, wear and problem areas.
Customer receives transparent pricing.
Deep clean, buff and fresh topcoat — usually done the same day.
Fast, clean and honest. Here is what every buff & re-coat includes:

In the Charlotte area, professional buff & re-coat typically runs $1 to $3 per square foot — a fraction of full refinishing.
Per Square Foot
Average 1,000 sq ft Project
These are typical ranges, not a quote. Your flat-rate price comes after a free in-home evaluation.
Our shop is at 4620 Providence Road, a few minutes from SouthPark. We buff and re-coat hardwood floors across Charlotte and nearby communities — most projects done in a single day. Call, text or WhatsApp for a free consultation.





(110 reviews) · as of October 2026

John was absolutely fabulous! I am selling my house and had a small portion of engineered hardwood flooring that had some water damage. Another Hardwood floor specialist had been recommended to me and basically told me that there was nothing that he could do.


I worked with this company through my realtors while living out of state, and the experience was smooth from start to finish. Even without direct communication, they handled everything professionally and completed the work promptly.


Had Majestic repair hardwood floor panels that were water damaged around a leaky toilet. I was worried that the newly hardwood planks were going to be visibly different from the other older wood surrounding the toilet but Jon did a fantastic job.


Jon and his team were great! We needed to get the floors refinished in our new house before the furniture arrived. Jon was able to get the job done in 3 days and they look fantastic! Highly recommend!

Posted on Google

They did an amazing job on my floors, Very professional and on time, they are very detail focused and know what they’re doing. The hardwood came out clean and a lot better than I excepted.



Highly recommend Majestic. We have chosen Majestic (Johnny) on two projects and been thrilled with the results.

Posted on Yahoo Local

John, and his company, Majestic Flooring are top notch. Fairly priced. We were most impressed with how neat they were.

Posted on Yahoo Local

2.5 stars Beautiful floors. Unprofessional contractors. My hardwood floors were completely refinished by the team. The team recommended and applied a beautiful stain and satin finish.

Posted on Yahoo Local

Rearranged my day to accommodate his appointment for an estimate with John (Johnny) Never showed and didn’t have the decency to let me know. Nor did he respond to my calls. Very unprofessional.

Posted on Yahoo Local

Horrible service but floors did come out great. Never showed up for 3 chances to clean up. Lots of repainting to do because they were sloppy and got stain EVERYWHERE!

Posted on Yahoo Local



We now have beautiful floors thanks to John and his crew! We bought a house built in the 1960’s with original red oak hardwoods that were in rough shape and contacted Majestic to have them sanded, stained, and refinished.

Posted on Angi

I had an excellent experience with Majestic. Being from out of state, I was unsure of who to go with for my flooring needs. However, reading reviews given to Majestic Flooring, along with a recommendation from my realtor, I decided they were the best ones for the job.

Posted on Angi

Johnny was great to work with from my first call with him. He was pleasant, professional, and friendly. I had severe discoloration on my floors from 12 years of area rugs.

Posted on Angi

John did a great job buffing and applying a semi-gloss coat on my hand scraped hardwood floors. They look amazing and refreshed. He was also able to refine a few scratches as well.


He was likeable. He was right on the target as far as the estimate goes. The work was pretty good. The only dislike I had was some part of the finish on the corners were missed; but it was not a big deal for me.

Posted on Angi

One person, Johnny runs this company. He was good. It was a lot of work. The price was excellent.

Posted on Angi
Every 3–5 years depending on traffic. Regular buff & re-coat in Charlotte, NC restores shine and extends finish life without full sanding.
Buffing refreshes light wear on a sound finish. Deep scratches, stains or worn-through finish need full refinishing — we’ll assess honestly.
Yes — most engineered and prefinished floors can be buffed as long as the wear layer is intact. We inspect first.
Minimal dust with our dust-control setup, low odor, and most projects finish within a day.
Dry to the touch in 4–6 hours, socks after 24 hours; furniture back in 48–72 hours.
Yes. Professional-grade finishes strengthen the surface, guard against spills and scratches, and restore a clean, uniform sheen, which is especially valuable in high-traffic homes and commercial spaces.
Look for proven local experience, professional-grade equipment, strong customer reviews, and a crew that checks finish compatibility before starting. A good company leaves your floors dust-free with an even sheen.
We take great pride in our work and ensure you are 100% satisfied with your project before we leave.